AMT Tracjet 4 / AMT Tracjet4

The TracJet 4 offers efficient 24 page-per-minute laser printing on forms from 3" to 33" long in 1/6- and 1/8-inch increments. Form feeding is bi-directional so forms can be presented for tear-off without wasting the next form. Unlike cut sheet laser printers, the TracJet 4 can print to the top and bottom edges of forms while maintaining precise registration and excellent image quality.

Easy setup and operation is guaranteed since all consumables pop out with minimal effort. Even the fuser can be removed in less than a minute. Plus, the TracJet 4's two-line LCD and simple menus offer "plain-English" messages and hassle-free configuration.

Special features include PCL-5, HP-GL/2, and ASCII line printer emulations for total compatibility with existing software; over 60 scalable and bitmap fonts (including a variety of bar code fonts); original Agfa Intelli- font® scaling technology; 4 MB SIMM-expandable memory; FLASH ROM BIOS for hands-free upgrades; precision image alignment controls; and a fuser temperature control for eliminating paper curling and stacking problems.

Speed
24 pages per minute
1,584 lines per minute

Fusing Heat and pressure (selectable from 160° to 180°C)

Warm-up Time
Less than 3 minutes (cold)
Less than 30 seconds (warm)

Resolution
300 x 300 dots per inch

Line Width
7.25 +/- 1 mil.

Fonts
Bitmap Fonts, Courier 10-, 12-, 16.6-pitch (medium, bold)
Line Printer 16.3-pitch (medium, bold)
Letter Gothic 10-, 12-, 16.6-pitch, OCR-A/B 10 Pitch
Line Draw, Scalable Fonts
CG Times Medium, bold, italic, bold/italic
Univers Medium, bold, italic, bold/italic
35 Symbol sets supported, Agfa®
Intelli-font scaling

Bar Codes
Code 3 of 9 4.6-, 8.1-, 9.3-pitch
(Bitmap) UPC/EAN 12-point (10-, 13-mil)
Code 128 16-point
I 2 of 5 18-point
USPS ZIP 12-point

Print Directions
Portrait, landscape, reverse portrait, reverse landscape

Image
Shifting Up, down, left, right

Operator
Panel Display Features 2-line alphanumeric LCD
3 LED’s
7 Keys
System Menu, Emulation Menu
Status, font and character
set Reports

Paper Feed
Straight-through pull tractors,
Handling bi-directional
Paper Type Pin-fed, fanfold and roll
Weight 16 to 42 lb.
Length 30 to 33 inches
Width 4 to 10 inches
Image Area 8.25 x 33 inches, printing
supported top edge to
bottom edge

Buffer
4MB (expandable to 10 or 16 MB with SIMMs)

Emulations
HP PCL-5, HP-GL/2, ASCII text
Interfaces IEEE 1284 (Centronics® mode) parallel
EIA RS-232-C serial
Baud Rates 1,200 to 38,400
Handshaking – DTR, Robust X-ON/X-OFF, X-ON/X-OFF

Physical
Height 9.76 in. (24.8 cm)
Width 18.11 in. (46 cm)
Depth 19.61 in. (49.8 cm)
Weight 55.12 lbs. (25 kg)

Electrical Power
US 90-132 vac, 10A @ 47-63 Hz
INTL 198-264 vac, 10A @ 47-63 Hz

Certifications
UL and cUL
FDA 21 CFR 1040.10, 1040.11
IEC 825
FCC Class B, Part 15
EMC 89/336/EEC
Energy Star® compliant

Consumables
Toner Kit
Toner (2) 16,000 pages @ 5% coverage
Bottle (2) 16,000 pages
Wiper (2) 16,000 pages
OPC Drum Kit 30,000 pages
Developer Kit
Developer 100,000 pages
Ozone filter 100,000 pages
Fuser Kit 300,000 pages

Options
Network interface